Operation Manual

ATAG timer thermostat page PROGRAM KEYS12
Function:
- programming time and temperature for heating in timer program
Standard timer programs for heating
The ATAG Brain is provided with 3 independent timer programs for the time and temperature settings for the
central heating. You can set three time blocks per day per timer program, independently over seven days.
The time settings are factory pre-programmed for the whole week. See the table below.
Default setting: timer program 1.
yaD 1kcolbemiT .pmeT yaD 2kcolbemiT .pmeT yaD 3kcolbemiT .pmeT
irF-noM00.01-00.7091irF-noM00.71-00.0191irF-noM03.22-00.7112
nuS-taS00.11-03.8091nuS-taS00.71-00.1102nuS-taS03.22-00.7112
yaD 1kcolbemiT .pmeT yaD 2kcolbemiT .pmeT yaD 3kcolbemiT .pmeT
irF-noM00.80-03.6091irF-noM00.71-00.8071irF-noM03.22-00.7112
nuS-taS00.01-00.8002nuS-taS00.71-00.0102nuS-taS03.22-00.7112
yaD 1kcolbemiT .pmeT yaD 2kcolbemiT .pmeT yaD 3kcolbemiT .pmeT
irF-noM00.01-03.8002irF-noM00.71-00.0181irF-noM03.22-00.7112
nuS-taS00.11-03.8002nuS-taS00.71-00.1181nuS-taS03.22-00.7112
Timer program 1
Timer program 3
Timer program 2
First set the "Day tempe-
rature" (see page 19)
before you set the timer
program. Subsequently
setting the day tempera-
ture affects the tempera-
ture set in the timer pro-
gram.