Operation Manual

ATAG timer thermostat page PROGRAM KEYS13
After you have set time block 1, you press the
key again and the second time block (Monday) appears
on the display.
After you have entered the settings for this, you press the
key again and then enter the data for the
third time block.
If, after setting the last time block for Monday, you press the
key again, you can enter the data for
the first time block for Tuesday. Program the settings for the different time blocks.
After you have entered the settings for the days of the week, or have completed a correction, press the
key. The standard display is displayed and the programmed settings are stored in the memory.
In case of identical time
block entries over diffe-
rent days, the copy
function can be used
(see page 14).
Mo-2
19.0
10.00 -- 17.00
°C
Be sure of continuous
time blocks. For non-
continuous time blocks,
the thermostat sets the
night temperature for the
intervening periods.
Tu-1
19.0
10.00 -- 17.00
°C