Operation Manual

and Function:
- programming time and temperature in the timer program for hot water
Standard timer programs for hot water
The examples below apply for a heating appliance with an indirectly heated boiler, fitted with a temperature
sensor. For a combi boiler, the temperature designation does not appear on the display, given that this cannot
be set.
Default setting: timer program 1.
yaD 1kcolbemiT .pmeT yaD 2kcolbemiT .pmeT yaD 3kcolbemiT .pmeT
irF-noM55.32-00.0036irF-noM00.00-00.0036irF-noM00.00-00.0036
nuS-taS55.32-00.0036nuS-taS00.00-00.0036nuS-taS00.00-00.0036
yaD 1kcolbemiT .pmeT yaD 2kcolbemiT .pmeT yaD 3kcolbemiT .pmeT
irF-noM00.60-00.0004irF-noM55.32-00.6036irF-noM00.00-00.0004
nuS-taS03.60-00.0004nuS-taS55.32-03.6036nuS-taS00.00-00.0004
yaD 1kcolbemiT .pmeT yaD 2kcolbemiT .pmeT yaD 3kcolbemiT .pmeT
irF-noM03.01-03.6036irF-noM00.71-03.0104irF-noM55.32-00.7136
nuS-taS00.01-03.6036nuS-taS00.71-00.0104nuS-taS55.32-00.7136
Timer program 1
Timer program 3
Timer program 2
First set the DHW tempe-
rature before you set the
timer program. The de-
fault setting is 63°C. Sub-
sequently setting the
DHW temperature af-
fects the temperature set
in the timer program.