Operation Manual

In brief a number of simple actions for daily use.
Wish:
You want to temporarily increase or
decrease the temperature in the room.
You want to have the heating on for
longer in the evenings (e.g. party, a visit
overruns).
You want the heating lower in tempe-
rature temporarily whilst you are
absent.
You want to have the day temperature
continuous for an indefinite period.
Action:
- Press
or key until DESIRED TEMP is displayed.
Using the same keys you can increase or decrease the temperature.
- Open or close any thermostatic valves (if present) more.
- Press the key for 4 seconds until PARTY TILL is displayed. Using the
and key, in increments of 30 minutes, you can set when you want
to have the heating switched over to night temperature (
can be seen on
the display).
- Press the
for 4 seconds until ABSENT TILL is displayed. Using the
and key, in increments of 30 minutes, you can set when you come back
home so that the heating is back up to temperature (
can be seen on the
display).
- Press the for 6 seconds until HEATING CONT is displayed. When you
release the key, the heating will maintain the day temperature for an
indefinite period of time (
flashes).
More info
on:
page 10
page 7
page 9
page 7