Operation Manual

EN 15
USE
Preparing espresso coffee using ground coffee
1. Press the ‘Coffee strength’ touch key (2) several times to select
“PRE-GROUND”.
2. Extract the machine by pulling it outwards using the handles.
3. Lift the central lid, place one measure of preground coffee in the
funnel, push the appliance back and proceed as described in the
section “Making coffee using coffee beans”. You can make just one
coffee at a time by pressing the ‘One cup deliver’ touch key (4).
4. After using the machine with pre-ground coffee, to go back to
making coffee using beans, deactivate the pre-ground coffee
function by pressing the ‘Coffee strength’ touch key (2).
Notes
Never introduce pre-ground coffee when the machine is off or it
could spread through the inside of the appliance.
Never add more than 1 measure, otherwise the appliance will not
make the coffee.
Use the measure provided only.
Introduce only pre-ground coffee for espresso coffee machines into
the funnel.
If more than one measure of pre-ground coffee is used and the
funnel clogs, push the coffee down with a knife. Then remove and
clean the brewing unit and machine as described in the “Cleaning
the brewing unit” section.
Preparing hot water
Hot water can be used to warm up cups and to make hot drinks, such
as tea or packet soups.
Warning! Only activate the hot water spout when there is a
receptacle underneath it. Escaping hot water can lead to scalds!
1. Put the hot water spout in place.
2. Place a container underneath the hot water spout.