instructions for use Combi steam oven CS4611D CS4612D CS4692D CS6611D CS6612D CS6692D
EN Manual Pictograms used Important information Tip EN 3 - EN 45
YOUR OVEN Your oven Initial use Operation Use Cleaning Solving problems Introduction 4 Control panel 5 Description 6 Guide rails/Telescopic guide rails 6 Accessories 7 Door 8 Cooling fan 8 Main functions 8 Keys 10 Navigation 11 What to do first 13 Selecting your function Function settings mode Progress mode Finish display Changing settings during the progress 16 16 18 18 19 Functions table 20 Steam function 25 Culisensor 28 Settings menu 29 Plus menu 30 Cooking information 31 Fast
YOUR OVEN Introduction Congratulations on choosing this Atag steam oven. This product is designed to offer simple operation and optimum user-friendliness. The oven has a wide range of settings, enabling you to select the correct cooking method every time. This manual shows how you can best use this oven. In addition to information about operating the oven, you will also find background information that may be useful when using the appliance.
YOUR OVEN Control panel 2 3 4 5 1 6 7 8 9 10 12 13 14 15 11 16 17 18 19 1. Function knob (in ‘Off’ position) 2. Defrost 3. Programs & Favourites 4. Fast preheat 5. Oven 6. Steam 7. Combi steam 8. Warming 9. Steam clean 10. Display 11. Selection knob 12. On/off key and stop key (cancel) 13. Light key 14. Timer key 15. Navigation key left* 16. Navigation key right* 17. Plus key 18. Water reservoir key 19.
YOUR OVEN Description 1 2 Level 5* Level 4 Level 3 Level 2 Level 1 4 5 1. 2. 3. 4. 5. Control panel Water reservoir cover Oven levels Oven door Door handle Guide rails/Telescopic guide rails • The oven has four or five guide rails (Level 1 to 4/5), depending on the model. Level 1 is mainly used in combination with bottom heat. The two upper levels are mainly used for the grill function. • Place the oven rack, baking tray or steam dish in the gap between the guide rail sliders.
YOUR OVEN Accessories Your appliance is accompanied by a range of accessories, depending on the model. Only use original accessories; they are specially suited to your appliance. Be sure that all the accessories that are being used are able to withstand the temperature settings of the chosen oven function. Note: not all accessories are suitable/available for every appliance (it may also differ by country). When purchasing, always provide the exact identification number of your appliance.
YOUR OVEN Accessories that can be supplied with your appliance (depending on the model) Perforated steam dish; 1/3GN. Perforated steam dish; 1/2GN. • Note: discolouration may occur at temperatures above 180 °C! This will not influence the proper function of the oven. • The steam dishes can be used simultaneously on two levels. Place the perforated steam dish in the middle of the oven and the non perforated steam dish one level below the perforated steam dish.
YOUR OVEN Oven Hot air Hot air + bottom heat Bottom + top heat Large grill Grill Large grill + fan Upper heat Bottom heat Bottom heat + fan Pro roasting Eco hot air Fast preheat Programs and favourites Favourites Programs Defrost Manual defrost Steam Steam Low temperature Sous vide Combi steam Hot air + steam density 1 Hot air + steam density 2 Hot air + steam density 3 Warming Regenerate Plate warming Keep warm Steam clean EN 9
YOUR OVEN Keys In the table below you can find the discription of the different keys. Keys Description of the keys On/off key and stop key - Press short: cancel operation or go one step back in the menu. - Press long: turn the appliance off or on. Light key - To turn the cavity light on or off. Egg timer - The egg timer can be used independent of the oven function. - The longest possible timer setting is 23:59. Navigation key left - To move the active area to the left.
YOUR OVEN Navigation active area function knob stop key navigation keys confirm key selection knob By turning the function knob away from the 0-position, the icon of the chosen main function is lit. The display will show the icon and name of the activated function for about 1,5 seconds. Next you will see the chosen main function and sub-function at the top of the display in the feedback bar. Also the function settings mode will become active (grey background).
YOUR OVEN At the top of the display is a feedback bar. This bar shows where you are in the menu and what setting you are changing. Functions / settings are separated with a vertical line.
INITIAL USE What to do first • Clean the oven interior and accessories with hot water and washing-up liquid. Do not use aggressive cleaning agents, abrasive sponges and similar. • The oven will emit a particular odor when it is used for the first time; this is normal. Make sure that there is good ventilation during initial use.
INITIAL USE Setting the time TIME l HOUR 11 : 12 13 00 1. Turn the selection knob and change the hours. 2. Confirm this setting by pressing the right navigation key or by pressing the selection knob. 3. Turn the selection knob and change the minutes. 4. Confirm this setting by pressing the confirm key. Setting the water hardness WATER HARDNESS 1 red Soft water The water hardness must be set prior to initial use.
INITIAL USE Display Test strip number/colour of the bars Type 1 4 green bars Very soft water 2 1 red bar Soft water 3 2 red bars 4 3 red bars 5 4 red bars Very hard water French hardness (°df) PPM German hardness (°dH) 0 - 90 0-9 0-5 90 -178 9 - 18 5 - 10 Rather hard water 178 - 267 18 - 26 10 - 15 Hard water 267 - 356 26 - 35 15 - 20 > 356 > 35 > 20 All the start-up settings are now set and the display will show the standby screen. The appliance is now ready for use.
OPERATION Selecting your function Select a function appropriate for the meal you are cooking. Consult the table in chapter ‘Functions table’ to see which functions are available. • Go directly to the progress mode by pressing the confirm key (this key is blinking if it is possible to start the program). After you have chosen a main function, the function settings mode is active (grey background). In this activated area, it is now possible to change the settings in this funtion.
OPERATION 5. Confirm the setting by pressing the right navigation key or by pressing the selection knob. The next sub-function setting becomes active. OVEN l COOKING TIME 14:30 210 °C ▷▷ The timer icon shows that there is no timer necessary for this function. Press the confirm key to start the program directly with the chosen settings (see step 7). ▷▷ To set the timer, go to step 6. ▷▷ If there is a timer necessary for a current function, the default timer setting is displayed instead of the timer icon.
OPERATION Progress mode • Left side on the screen, the temperature is displayed (if the set temperature is not reached, the temperature will switch between cavity temp (grey) and set temp (white)). If the set temperature is reached a pop-up will appear ‘set temperature is reached’. • Right side on the screen, the time (counting down) or the progress time (counting up if no time was set) is displayed. Next to the cooking time you can see the finishing time.
OPERATION Add extra time 1. Press the right navigation key to select ‘Add extra time’. 2. The time setting becomes active and can be changed directly by rotating the selection knob. 3. Confirm by means of the confirm key. The previous process is activated again. Gratin 1. Press the right navigation key to select ‘Gratin’. Grill settings will be shown. 2. The temperature (default 200 °C) and time can be set or the program can be started directly by pressing the confirm key (time will start counting up).
USE Functions table Consult the table to choose the desired function. Also consult the instructions for preparation on the dish packaging. Function Description Oven functions Hot Air • Heating by means of hot air from the back of the oven. • This mode provides uniform heating and is ideal for baking. • Place the baking tray or oven rack in the middle of the oven. • Suggested temperature: 180 °C • Preheating is recommended.
USE Function Description Large Grill • Heating by means of the upper element and grill element. • This mode can be used with dishes and baked goods that require a distinctive bottom crust or browning. Use just before the end of the baking or roasting time. • Place the oven rack in the upper part of the oven and the baking tray in the middle of the oven. • Maximum allowed temperature: 230 °C • Monitor the cooking process at all times. The dish may burn quickly due to the high temperature.
USE Function Description Top Heat • Heating only by means of the upper heating element. • This mode can be used when you wish to bake/ roast the top part of your dish. • Place the baking tray or oven rack in the middle of the oven. • Suggested temperature: 150 °C 2 Bottom Heat • Heating only by means of the lower heating element. • This mode can be used with dishes and baked goods that require a distinctive bottom crust or browning. • Place the baking tray or oven rack in the lower part of the oven.
USE Function Description ECO Hot air • Heating by means of hot air. ECO hot air uses less energy but gives the same result as the hot air setting. Cooking takes a few minutes longer. • This mode can be used for roasting meat and baking pastry. • Place the baking tray or oven rack in the middle of the oven. • Suggested temperature: 180 °C • This setting makes use of the residual heat (heating is not on the whole time) to achieve low energy consumption (in accordance with energy class EN 60350-1).
USE Function Description Combi steam functions Hot air + Steam density 1 / 2 / 3 High 3 Medium 2 Low 1 • Heating by means of hot air in combination with steam. • The steam is sprayed into the oven cavity at regular intervals. • This mode can be used for baking types of pastry such as puff pastry, brioche pastry, yeast dough buns, French bread, gratins and roasting meat. The hot steam ensures a nice crispy brown top and an airy texture. Meat and fish remain nice and juicy inside.
USE Function Description Defrost • With this function, the air circulates by means of the fan. The air will be heated to a temperature of 30 °C. • Use this function to defrost frozen dishes. Programs and Favourites • Programs: for baking and roasting. Select a dish from a list of pre-programmed dishes. • Favourites: Select your own stored recipes. Fast preheat • With this function, the oven cavity is quickly heated to the desired temperature. Do not use this setting when you have a dish in the oven.
USE • Steam does not distribute smell or taste, enabling meat or fish to be cooked together with vegetables. • Steam is also suitable for blanching, defrosting and warming or keeping a dish warm. Sous vide Using the sous vide steam function: • Vacuuming ▷▷ First vacuum the food in plastic using a vacuuming machine. This process removes most of the air from the plastic bag. The bag preserves nutrients and taste during cooking, resulting in food that is juicier, softer and tastier.
USE Any water remaining in the steam system after cooking will be pumped back into the water reservoir. Empty, clean and dry the water reservoir after using the steam function.
USE Culisensor If the culisensor is plugged in, the culisensor screen will be shown and a small culisensor icon will appear next to the time. The oven operates until the food core reaches the set temperature. The core temperature is measured by means of the temperature probe. 1. Remove the rubber cap from the socket (right upper corner of the oven cavity). 2. Insert the culisensor plug into the socket and insert the culisensor completely into the dish. The display will show the culisensor screen and icon.
USE Settings menu The settings menu is only available by pressing the ‘plus key’ when the appliance is in standby mode.
USE Display You can set the following from this menu: • Brightness (low, mid, high) • Night mode (start and end time for lower display brightness: first display set start timer, second display set end time) • Clock size (small / large) • Stand-by (auto switch off / manually switch off) Changing to manually switch off will increase energy consumption.
USE + Menu Description Icon Cooking info Request more information about the selected function. Fast preheat Preheat the oven to the desired temperature quickly (not available in combination with delayed start). Delayed start The cooking process will start automatically and will be finished at the preferred time. Only available if a cooking time is set, not available in combination with preheat.
USE Fast preheat There are two different ways to use fast preheat: Activate the fast preheat in the settings menu (to be default on or off) 1. Press the plus key when the appliance is in standby mode. Go to ‘Cooking settings’ and select if the fast preheat should be default on or off. 2. Press the confirm key. ▷▷ If the fast preheat is set to ‘default on’ the small preheat icon will be shown to indicate the active preheat function. ▷▷ This option is only available for the oven functions.
USE 3. Press the confirm key. The display will show the delay start symbol, the cooking time and the end time. 4. Change the finishing time by turning the selection knob and confirm with the confirm key. A small icon will appear to indicate that the function is active. ▷▷ To cancel the delayed start: go to ‘Delayed start’ and select ‘cancel delayed start’ (a pop-up will appear to confirm the cancellation of the delayed start). 5. Start the program: press the confirm key to go to the progress mode.
USE 7. Save the stage and return to the stage cooking overview by pressing the confirm key. ▷▷ If the stop key is pressed the setting will be cancelled and the display will turn to the previous display. 8. If desired, add a third stage. Repeat steps 4, 5, 6 and 7. 9. After confirmation, the display will show the set stages, with an edit and delete icon. 10.If all stages are set according to your wishes, then return to the oven setting screen. Press the ‘plus key’ to close the plus menu.
USE Favourites (see chapter ‘Finish display’) • You can select your own stored recipes in ‘favourites’. • If there are no saved recipes, a pop-up will appear: ‘No saved dishes’. • The name of the recipe appears in the text bar and the saved oven settings are shown. Egg timer The egg timer can be used independent of the oven function. 1. Press the timer key. 2. Change the time by rotating the selection knob. ▷▷ The longest possible timer setting is 23:59. 3. Confirm the setting by pressing the confirm key.
USE Warming • Regenerate ▷▷ This mode is used to warm already cooked dishes. The use of steam means there is no loss of quality. Taste and texture are preserved as though the dish is freshly-cooked. Various dishes can be regenerated simultaneously. • Plate warming ▷▷ This function is used when you want to warm tableware (plates, cups) so that the served food stays hotter for longer. ▷▷ For this function you can set the warming-up temperature and duration.
CLEANING Cleaning the appliance Clean the appliance regularly to prevent fat and food particles from accumulating, especially on the surfaces of the interior and the exterior, the door and the seal. • Activate the child lock (to prevent that the appliance is switched on accidentally). • Clean the exterior surfaces with a soft cloth and warm soapy water. • Next wipe with a clean, damp cloth and dry the surfaces. • Remove splashes and stains on the interior surfaces with a cloth and soapy water.
CLEANING Cleaning the water tank filter If the water tank filter is dirty, you can clean it under the tap. 1. Remove the suction tube with the filter. 2. Clean it out under the tap and put it back into position. Ensure that the filter touches the base of the water tank Descaling During the steam process, there can be an accumulation of mineral deposit in the steam system. This needs to be removed from time to time. You need to carry out this task when the ‘Appliance needs descaling’ notification is shown.
CLEANING As well as an effective descaling action, it also has a cleansing and anti-bacterial effect, ensuring that the appliance’s internal components are preserved in an optimum hygienic state. Therefore food’s good taste is preserved and the appliance’s service life is extended. • Water is used for the steaming process. Water contains calcium and magnesium. Heat causes the water to condense, leaving a mineral deposit (not harmful to humans).
CLEANING Replacing the oven light bulb The lamp in this household appliance is only suitable for illumination of this appliance. The lamp is not suitable for household room illumination. The lamp is a consumer item and therefore not covered by warranty. Replace the defective lamp with a lamp of the same type. • Disconnect the appliance from the power supply by removing the plug from the socket or by switching off the circuit breaker in the fuse box.
CLEANING Removing the oven door • Keep your fingers away from the hinges of the oven door. The hinges are spring loaded and can cause injury if they spring back. • Make sure that the hinge latches are applied correctly to lock the hinges. Remove the oven door. 1. Open the door to the fully open position. 2. Lift both hinge latches (A) and pull them towards the oven door (B). The hinges will be locked in the 45° position. 3. Gently close the door until it reaches a 45° angle. 4.
CLEANING Removing the oven door glass The inside of the glass in the oven door can be cleaned. For this it must be removed from the oven door. 1. Slightly lift (1) and shift (2) the clamps at the lower left and right of the door to release the glass (A). 2. Grab the glass (A) at the bottom and gently lift (3) and shift (4) it to remove it from the upper support. 3. The inner glass (B) (depending on the model) can be removed by carefully lifting (5) and shifting (6) it to removing it from the lower support.
SOLVING PROBLEMS General If you have problems with your oven, then consult the error overview below. Should the problems persist, then please contact the Customer Services Department. The food stays raw • Check whether the timer has been set and you have pressed the ‘confirm key’. • Is the door closed properly? • Check whether a fuse has blown or a circuit breaker has been activated. The food is overcooked or undercooked • Check whether the correct cooking time has been set.
SOLVING PROBLEMS Clicking sounds can be heard when the oven is working, particularly in the defrost setting. • This is normal. The circuit breaker switches off regularly. • Consult a service technician. The display gives an error code, ERROR XX ... (XX indicates the number of the error). • There is a fault in the electronic module. Disconnect the appliance from the power supply for a few minutes. Then reconnect it and set the current time. • Consult a service technician if the error persists.
YOUR OVEN AND THE ENVIRONMENT Disposal of the appliance and packaging This product is made from sustainable materials. However, the appliance must be disposed of responsibly at the end of its useful life. The government can provide you with information about this. The packaging of the appliance can be recycled. The following materials have been used: • cardboard • polyethylene wrap (PE) • CFC-free polystyrene (hard PS foam) Dispose of these materials responsibly in accordance with legal provisions.
EN 46
EN 47
The appliance identification card is located on the inside of the appliance. When contacting the service department, have the complete type number to hand. *687352* 687352 687352 / VER 2 / 06-04-2018 You will find the addresses and phone numbers of the service organisation on the guarantee card.
