Operation Manual

EN 9
USING THE ACCESSORIES
• Rest the spit onto the cradle with the pointed end towards the
back and gently push until the tip of the spit entres the turning
mechanism at the back of the oven. The blunt end of the spit
must rest on the ‘v’ shape. (The spit has two lugs which should be
nearest to the oven door so to stop the spit going forward, the lugs
also act as a grip for the handle.)
• Before cooking unscrew the handle. After cooking screw the
handle back on to help remove the spit from the cradle.
Telescopic slide guides
Telescopic slide guides and other oven accessories might get very
hot! Use kitchen gloves or other suitable protection!
Telescopic slide guides are located inside the oven to the right and to
the left in two different levels.
• To insert the baking tray or wire rack, first slide out the telescopic
guides for one particular level.
• Place the tray or wire rack on the guides. Pay attention to the
round holes in the baking tray (see illustration)! By placing the wire
rack you must push it tight between the guides. Push them back
completely into the oven. Close the oven door only after you have
pushed the telescopic guides into the oven.
Divider, wire rack, baking tray and deep baking tray
Positioning the divider
Insert the divider into level 3 of the oven.
Positioning the wire rack
Insert the wire rack at any desired level.
Positioning the baking tray or deep baking tray
Insert the baking tray and/or the deep baking tray at any desired level.