Operation Manual

EN 71
ERROR AND SAFETY CODES
Error Code General Function
TEMP SENSOR ERROR
SAFETY SHUTOFF
Oven has continued operating at set
temperature for prolonged time.
Turn the oven off and remove food. Al-
low the oven to cool down before using
again.
An error of the oven may cause low per-
formance and problems in safety. Stop
using the oven immediately.
If any of the above errors occur, please contact ATAG Customer
Service.
The following error codes appear if the accessory is not
appropriate for the function that has been chosen.
PARTITION MISSING
The usage of the divider is not correct (see page 23).
For upper cavity, lower cavity and double oven, the divider should be
inserted. For single oven the divider should be eliminated.
SIDE RACK PRESENT DURING PYROLITIC CLEANING
The pyrolitic function is switched on while the side racks are still
present. The cleaning process will not start until the racks have been
removed.