Operation Manual

GB 9
Button E
Timer
Operation:
The Timer button times the aspiration speed of the hood when it is
activated for 10 MINUTES. After this time has elapsed the appliance will
switch off.
Activation:
In order to activate the function apply a light pressure to the Timer
button.
When the function is active the LED indicator of the set speed starts
flashing.
When the lights are on, at the end of the Timer function, these
automatically reduce the light intensity by 30-40%.
In order to deactivate the function, before the predetermined time, a
further pressure of the Timer button, will switch off the appliance.
Warning!
If the intensive speed is operating, the Timer cannot be activated.
Clean Air function
Special Functions (Button E):
This function guarantees the continuous recycling of the air in the
kitchen for a maximum of 12 hours. By keeping the Timer button
pressed for 4 seconds, when the appliance is switched off, the “CLEAN
AIR” function is activated. This turns on the motor for 10 minutes every
hour at the first speed; LED 4 flashes with an interval of 1 second ON
and 2 seconds OFF. After this time the motor is switched off and LED 4
remains fixed on the display; after another 50 seconds the motor starts
again for another 10 minutes and so on.
In order to deactivate the “clean air” function press any button except
for the lights one.
USE