Operation Manual

GB 18
INSTALLATION
Connection
Electric connection for model: ES1011MAM, ES1011UAM,
ES1092MAM, ES1211MAM, ES1211NAM, ES1211UAM, ES1211AAM,
ES1211ZAM, ES1292NAM, ES1292MAM, ES1511MAM.
The appliance has been manufactured as a class II, therefore no earth
cable is necessary.
Make sure the supply voltage ratings correspond with those stated on
the appliance data plate. The connection to the mains is carried out as
follows:
BROWN = phase L
BLUE = phase N.
Electric connection for model: ES1011TAM , ES1511MAX,
ES1211MAX.
This appliance is manufactured in class I, it must therefore be
connected to the earth system.
Connection to the power mains must be carried out as follows:
BROWN = Phase L
BLUE = N neutral
YELLOW/GREEN = earth.
The neutral cable is to be connected to the clamp with symbol N while
the YELLOW/GREEN cable is to be connected to the clamp next to the
earthing symbol .
During the electrical connection make sure that the electrical socket is
equipped with earth connection.
This hood has been provided with a power plug. When installing the
hood, make sure that this plug remains accessible. We recommend
installing the wall socket out of view, behind the chimney cover.
Attention:
If you want to make a fixed connection, ensure that a multi-pole switch
with a distance between contacts of 3 mm is installed in the supply
cable.