Operation Manual

113
INSTALLATION INSTRUCTIONS
G25/25 mbar G20/20 mbar G25/20 mbar G30/29 mbar G31/29 mbar G31/37 mbar G30/50 mbar G31/50 mbar
burner type (kW) (kW) (kW) (kW / g/h) (kW / g/h) (kW / g/h) (kW / g/h) (kW / g/h)
simmer 1.00 1.00 0.90 0.90 / 65 0.79 / 57 0.90 / 65 1.00 / 72 0.88 / 63
normal 2.00 2.00 1.80 1.60 / 115 1.41 / 101 1.60 / 115 2.00 / 144 1.76 / 127
strong 3.00 3.00 2.70 2.30 / 166 2.02 / 146 2.30 / 166 2.70 / 194 2.38 / 171
wok 4.50 4.50 4.50 3.50 / 252 3.08 / 222 3.50 / 252 4.00 / 288 3.52 / 253
wok HG96/97..M 5.70 5.70 5.00 5.50 / 396 4.85 / 350 5.50 / 396 5.50 / 396 4.75 / 342
setting up the appliance for other gas types (except HG96/HG97..M)
This appliance has been set up for natural gas. The appliance can be set
up for other gas types and pressures by means of a conversion kit. You can
order the kit from the sales and service organisation. The conversion
instructions are supplied with the kit.
gas information
112
INSTALLATION INSTRUCTIONS
space to be left free around the appliance
A hob generates heat. Leave a sufficient distance between the appliance
and non heat-resistant materials. Take care also with materials that may
discolour (such as stainless steel).
The gas hob may only be built in next to one vertical wall.
please note
The bottom of the hob becomes hot. Do not place combustible items in
a drawer if the drawer is fitted directly below the hob.
install appliance and make connections
Place the appliance in the worktop and secure it using the mounting
brackets and screws supplied.
Connect to the gas supply.
Check with soap suds that the connection is gastight.
Connect the appliance to mains electricity.
building in
min 600 (HG61)
min 750 HG71/76/77
min 900 HG96/97
min. 650 mm
min. 450 mm
min. 100 mm
min. 100 mm
700001740000_hl_HG_4t:opm 23-10-2007 9:59 Page 112