Operation Manual

103
INSTALLATION INSTRUCTIONS building in
Remove the protective foil of the sealing strip (A) and attach the sealing
strip in the groove of the aluminium profiles or the edge of the glass
plate. Do not attach the sealing strip through the corner. Instead, cut
4 pieces that fit tightly together in the corners.
installation sequence for a stainless steel appliance HG77..M and HG97..M
Remove the protective foil from
the sealing tape and apply the tape
around the cut-out in the worktop.
Start at the rear side of the appliance
and tape the sealing strip along the
corners. Make sure that the ends of
the sealing strip fit tightly together.
attachment points for mounting brackets
0-3 mm.