Operation Manual

102
cut opening in worktop
Saw the opening in the worktop. This should be done very accurately
(building in dimensions).
If the woodtop is made of treated wood, then coat the sawn surfaces of
the top with sealing varnish, to prevent moisture causing the top to swell.
preparing the hob
Fit the elbow supplied on the appliance’s gas connection.
installation sequence for a glass appliance
INSTALLATION INSTRUCTIONS building in
1/2" ISO 228
(straight)
1/2" ISO 7/1
(conical)
sealing ring
1/2" ISO 228
(straight)
1/2" ISO 228
(straight)
sealing ring
only for France
A