Operation Manual

7574
INSTALLATION INSTRUCTIONS
possibilities for building in
Make a hole in the side of the cupboard for the gas pipe and electricity
supply.
preparing the hob
Connect the cooking appliance to the gas supply. Check the connection
for leaks with soapy water.
only for France:
building in
1/2 inch ISO 228
(straight)
1/2 inch ISO 7/1
(conical)
1/2 inch ISO 228
(straight)
1/2 inch ISO 228
(straight)
INSTALLATION INSTRUCTIONS general
electrical connection (solely for appliances with a spark switch)
230 V - 50 Hz - 0.6 VA
The electrical connection must comply with national and local
regulations.
Wall socket and plug must be accessible at all times.
If you want to make a fixed connection, ensure that a multi-pole switch
with a distance between contacts of 3 mm is installed in the supply cable.
please note
This appliance must be earthed.
If the connecting cable is damaged, it may only be replaced by the
manufacturer, the manufacturer's service organisation or equivalently
qualified persons, in order to avoid dangerous situations.