Operation Manual

GB 15

Switching on and power setting

The cooking zones have 12 levels. Beside it there is a level ‘boost’.

1. Put a pan on a cooking zone.

2. Press the

button.

You will hear a signal.

3. Press the on/off button

of the cooking zone concerned.

In the display ‘-’ will blink and you will hear a signal. If no cooking

setting is selected after a zone is switched on, the cooking zone switches

off automatically after 10 seconds.

4. Press the

or button, or the or button to select the

desired setting. The cooking zone starts automatically in the level

that has been set (when a pan is detected).

º If you press button

or ﬁ rst, level 6 appears.

º If you press button

ﬁ rst, level 12 + ‘boost’ appearin the

display. This is power level ‘boost’ and you can use this setting

if you want to bring dishes to the boil quickly (see page 16).

º If you press button

ﬁ rst, level 1 will appear.

Tips

• With the

or button you can raise or reduce the power

setting step by step. By pressing the

or button, you can

raise or reduce the power setting quick.

• Press and hold the

, , or button to set the desired

power level more quickly.

Pan detection

If the hob doesn't detect a(n) (iron-containing) pan after a cooking

power has been set, the display will continue to ﬂ ash and the cooking

area remains cold. When no (iron-containing) pan is placed within

one minute, the cooking zone will switch off automatically (also refer

to pages 13 and 14; “Pans”).

Residual heat indicator

If a cooking zone has been used intensively it will retain heat for

several minutes afterwards. As long as the cooking zone is still hot an

“H” will be visible in the display.

Settings

OPERATION