Operation Manual

GB 32
General
INSTALLATION INSTRUCTIONS
Safety instructions for the installation
• The connection must comply with national and local regulations.
• The appliance must always be earthed.
• This appliance may only be connected by a competent electrical
installer.
• For the connection, use an approved cable (for example type
HO7RR) in accordance with the regulations. The cable casing
should be of rubber.
• The connection cable must hang freely and is not to be fed
through a drawer.
• If you want to make a fi xed connection, make sure that a multi-
polar switch with a contact separation of at least 3 mm is fi tted in
the supply line.
• The worktop the hob is built into must be fl at.
• The walls and the worktop surrounding the appliance must be
heat resistant up to at least 85 °C. Even though the appliance
itself does not get hot, the heat of the hot pan could discolour or
deform the wall.
• Damage caused by incorrect connection, installation or use, will
not be covered by the guarantee.
Clearance
Suffi cient all-round clearance is essential to the safe use of the hob.
Check that there is enough clearance.
cooker hood
cabinet
side wall
hob
*
HI6271F: min. 64 cm
HI6271M: min. 65 cm
HI6211M: min. 65 cm
HI7271M: min. 78 cm
HI7211M: min. 78 cm
HI7271I: min. 77 cm
HI8271M: min. 81 cm
HI9271M: min. 91 cm
HI9271I: min. 90 cm
HI3271M: min. 33 cm