Operation Manual

87
Switching on the double-ring cooking zone (only HL40..M)
Switching on
Turn the adjusting knob to the maximum setting (hard against the stop)
and then choose a setting.
The two cooking zones will now always give off heat together.
Switching off
Turn the adjusting knob to the zero position.
Next time you switch the cooking zone on again only the inner cooking
zone will come on.
You can never use the outer cooking zone on its own.
USE
setting
86
USE
setting
General
On the glass work surface the 4 cooking zones are indicated by a circle.
The diameter of the base of the pan should correspond as closely as
possible with the diameter of the cooking zone.
Switching on and off
switching on
Place a pan on a cooking zone and turn the control knob to the desired
setting.
The cooking zone will then heat up. The cooking zone switches on and
off automatically to provide the power you have set. At lower settings the
cooking zone is off for a long time and on from time to time. At higher
settings the cooking zone is on for a long time and off from time to time.
Switching off
Turn the knob to the zero position.
Residual-heat indicator
The indicator shows that the cooking zone is still hot, and goes out as
soon as the glass top reaches a safe temperature.
Residual heat is indicated by a light for each cooking zone on the glass
hob.
12
11
10
9
8
7
5
3
1