Operation Manual

EN 61
ERROR AND SAFETY CODES
Code General Function
TEMP SENSOR ERROR
SAFETY SHUTOFF
Oven has continued operating at set temperature
for prolonged time.
Turn the oven off and remove food. Allow the oven
to cool down before using again.
An error of the oven may cause low performance
and problems in safety. Stop using the oven
immediately.
PARTITION MISSING
The usage of the divider is not correct. Refer to
the ‘Setting the divider mode’ (see page 21).
For upper, twin and lower mode, the divider
should be inserted, and for single mode, the
divider should be eliminated.
If any of these errors occur, please contact ATAG Customer Service.