Operation Manual

adjustable door compartments
The adjustable door compartments can be moved
f rom the appliance to the place where you are
w o r k i n g .
removal
1. Lift the door compartment straight up out of the
slots.
2. Remove the door compartment.
(re)fitting
1. Determine the desired height.
2. Insert the door compar
tment studs into the slots
in the rail.
3. Push the door compartment slightly downwards.
With the aid of the door compartment divider, you
can prevent small products tipping over or sliding
out of position.
fitting
1. Slide the door compartment divider onto the
edge of the door compartment.
2. Place the divider in the desired position.
The dairy products compartment is suitable for
storing butter and cheese.
fitting
1. Push in the pins at the sides.
2. Push the pins into the recesses in the door.
door compartment divider
dairy products compartment
refrigerator section shelves
slide-out "anti-drip" shelves
Food at the back of the refrigerator section can be
reached easily, thanks to slide-out shelves. The
edges have been specially designed so that moisture
cannot drip onto the shelves below. Always push the
shelf fully back into position before you close the
door of the refrigerator section.
removal
Remove the shelf as follows:
1. first, lift up the front edge;
2. then raise the rear edge and lift it out of the
slots.
fitting
1. Select the desired height.
2. Keep the front edge slightly raised and insert
the rear edge into the slots on the rear wall.
3. Lower the front edge until the shelf clicks into
position.