Operation Manual

technical information
model number KD5/7..G
power supply 230 V
frequency 50 Hz
connected load 600 W
energy label G
height 1700/1772 mm
length of
connection cable 270 mm
disposal of packaging and
appliance
Render discarded appliances unusable
immediately by removing the plug from the
socket and cutting the cable. Disable any locks
on the refrigerator or remove the doors.
It is important that an old refrigerator is
disposed of in a responsible manner and in
accordance with government regulations.
In the past, CFCs and HFCs were used in the
production of cooling and freezing appliances -
in the cooling circuit and insulation foam. If
these substances are released into the air, they
could harm the ozone layer in the atmosphere.
Your new fridge/freezer combination is
100% CFC- and HFC-free.
The packing materials used for your new
fridge/freezer combination should also be
disposed of in a responsible way.
You can obtain information about the
responsible disposal of discarded household
appliances from the relevant authorities.
fitting door handle
Fit the handle. Do not screw in the screws
completely.
Fit the protective cover over the handle. Do not
screw in the screw completely.
Raise the handle slightly and screw in the
protective cover screw completely. The door
panel and protective cover should then fit
smoothly together.
Now screw in the other screws tightly.
The cladding on the refrigerator section is fitted
in the same way.
When fitting the panel in the door of the
refrigerator section, the sawn-out corner should
be in the top right position.
superimposed panel
You may also choose superimposed panels.
These should be 19 mm thick.
Attach the panel to a 6 mm thick underplate by
means of glue or screws.
Bear in mind the required cutouts for the
projecting part of the panel.
Maximum weight of panel
refrigerator section 17 kg
freezer section 9 kg
door claddings (continued)
cutout of 51 mm on
e door handle side
superimposed
panel
cutout of
32mm on the
door hinge side
6 mm thick
underplate
19 mm
refrigerator
door