User manual

12 ATAG
After removing the inner glass panels and the screws which secure the terminals,
detach the lower terminals (a certain force is required for this) (see Fig. 17).
1
2
Fig. 17
1 - Lower terminal support (left)
2 - Lower terminal support (right)
Repositioning the lower terminals
Reposition the lower terminals in the support uprights for the inner glass panels
in the new position (see Fig. 18).
Fig. 18
1 - Lower terminal support (left)
2 - Lower terminal support (right)
1
2
Fig. 19
Representative diagram of the
repositioning of the terminals.