User manual

14 ATAG
Fig. 22
1 - Inner glass
2 - Support upright for inner glass
Re-inserting the inner door glasses
Re-insert the inner door glasses (see Fig. 22).
Note:
To correctly mount the inner glass with side decors along the frame (intermediate),
the surface marked with stripes has to face the oven cavity in a way that, when
touching the surface on sight, the light roughness of the silk-screen printing is
perceptible.
To correctly mount the inner glass with side decors on two lateral sides (external),
the surface marked with stripes has to face the oven door in a way that, when
touching the surface on sight, the light roughness of the silk-screen printing is not
perceptible.
1
2
Re-inserting the upper profile
Proceed as follows to replace the upper profile:
- Place the upper profile by inserting it into the support uprights.
- Press it until fully inserted (see Fig. 23).
Fig. 23
1 - Upper profile
2 - Support upright for inner glass (right)
3 - Support upright for inner glass (left)
1
2
3