User manual

ATAG 15

Re-inserting the door with right-to-left opening

Reversal of aperture from right to left

Close-up view of the door latch

Before mounting the door with aperture on the right, it is necessary to re-position

the latch (Fig. 24).

Fig. 24

1 - Door latch

2 - Front frame

Removing the door latch

Remove the door latch by unscrewing the screws which secure it in position (Fig. 25).

Fig. 25

1 - Support bracket for door latch

2 - Upper screw

3 - Lower screw

Removing the latch masking cap

Before refitting the door latch on the opposite side, the masking cap must be removed.

To do so, it is sufficient to use a flat-head (normal) screwdriver (see Fig. 26).

Fig. 26

1 - Latch masking cap

2 - Standard screwdriver

3 - Front frame