User manual

16 ATAG

Refitting the door latch on the opposite side

Position the door latch with its support bracket on the opposite side and secure it

using two screws (see Fig. 27).

Fig. 27

1 - Door latch

2 - Support bracket for door latch

NOTE: Remember to fit the masking cap on the side opposite to the door latch.

Removing the lower hinge

To remove the lower hinge simply remove the two screws which secure it in position

(see Fig. 28).

Fig. 28

1 - Upper hinge screw

2 - Lower hinge screw

3 - Lower hinge

NOTE : Before removing the hinge support upright, it is necessary to remove the lower

hinge.