User manual

18 ATAG

Positioning the hinge support upright

To place the hinge support upright in the new position, simply place it in alignment

with the holes and secure using three screws in the upper section and three in the

lower section.

Fig. 31

1 - Hinge support upright

2 - Door alignment screw

NOTE: Before assembling the hinge support, it is necessary to re-position the door

alignment screw. This screw must always be positioned in the upper section of the

upright (see Fig. 31).

Fig. 32

1 - Front screw

2 - Position of rear screw

3 - Position of lower screw

4 - Hinge support upright

Fixing the screws in the upper section of the hinge support upright