User manual

ATAG 19
Fig. 33
1 - Hinge support upright
2 - Position of rear screw
3 - Position of front screw
4 - Position of lower screw
Fixing the screws in the lower section of the hinge support upright
1
2
3
4
Repositioning the hinge from upper section to lower section
In order to secure the door to the left side, it is necessary to remove the upper
hinge (which was originally in the upper section - see "Position of the door hinges
and latch" - page 6) and fit it in the lower left-hand position.
Replacing the lower hinge
To replace the lower hinge, simply position the hinge and secure using the two
screws (see Fig. 34).
1
2
3
Fig. 34
1 - Upper screw
2 - Lower screw
3 - Lower hinge