User manual

20 ATAG
Removing the upper masking cap
Before fixing the right-aperture door, it is necessary to re-position the upper masking
cap.
To do so, it is sufficient to use a flat-head (normal) screwdriver (see Fig. 35).
Fig. 35
1 - Front control panel
2 - Masking cap
3 - Screwdriver
1
2
3
Repositioning the upper masking cap
To replace the upper masking cap, insert into the hole, first at the upper edge and
then at the lower lip (see Fig. 36).
Fig. 36
1 - Front control panel
2 - Masking cap
1
2