User manual

ATAG 23

Fig. 41

Adjusting the alignment of the door

To align the door with the control panel (see Fig. 41) adjust the alignment screw

(see Fig. 29 Pos. 4) in the following sequence:

1. Unscrew the two upper screws (see Fig. 43).

2. Adjust the alignment screw so that the door is aligned with the front control

panel (see Fig. 42).

3. Tighten the two upper screws (see Fig. 43 Pos. 1 and 2)

Fig. 42

1 - Door alignment screw

2 - Hinge support upright

Door alignment screw