User manual

4 ATAG
Close-up view of lower terminal.................................................................. 11
Repositioning the lower terminals ............................................................... 12
Close-up view of securing lower terminals .................................................. 13
Re-positioning rubber distance holders....................................................... 13
Re-inserting the inner door glasses ............................................................. 14
Re-inserting the upper profile ..................................................................... 14
Re-inserting the door with right-to-left opening ....................................... 15
Reversal of aperture from right to left .......................................................... 15
Removing the door latch............................................................................. 15
Removing the latch masking cap ............................................................... 15
Refitting the door latch on the opposite side ............................................... 16
Removing the lower hinge .......................................................................... 16
Reversing the hinge support upright ........................................................... 17
Positioning the hinge support upright.......................................................... 18
Fixing the screws in the upper section of the hinge support upright ............ 18
Fixing the screws in the lower section of the hinge support upright ............. 19
Repositioning the hinge from upper section to lower section ...................... 19
Replacing the lower hinge .......................................................................... 19
Removing the upper masking cap .............................................................. 20
Repositioning the upper masking cap ........................................................ 20
Refitting the door to the oven ..................................................................... 21
Refitting the door with aperture from right to left ......................................... 21
Repositioning the upper hinge .................................................................... 21
Securing the upper hinge ........................................................................... 22
Fitting the front control panel ...................................................................... 22
Adjusting the alignment of the door .......................................................... 23
Door alignment screw................................................................................. 23
Tightening the screws................................................................................. 24
Oven with right-to-left door opening ........................................................... 24