User manual

ATAG 5

Purpose of this user manual

The purpose of this manual is to provide simple instructions for reversing the hinged-

type door fitted to ATAG ovens.

Removing the right-hinged door

In order to remove the door, it is necessary to remove the oven from the cabinet.

Removing the oven from the cabinet

To extract the oven from the cabinet, remove the four screws which secure the

appliance to the cabinet. These screws are located on the front of the frame (see

Fig. 1 and 2).

Introduction

Fig. 1

1 - Upper screw (left)

2 - Upper screw (right)

3 - Lower screw (left)

4 - Lower screw (right)

Fig. 2

1 - Screw securing the oven to the

cabinet

2 - Washer for screw nr.1