User manual

ATAG 7
Fig. 5
1 - Screws for upper hinge
2 - Hinge support
3 - Screws for lower hinge
Position of the hinge screws
1
3
2
Fig. 6
1 - Front panel
2 - Upper screw
Removing the front panel screw
1
2
Fig. 7
1 - Upper hinge
2 - Upper screw
3 - Lower screw
Close-up view of hinge screw
1
2
3
Removing the door
To remove the oven door, proceed as follows:
1. Remove the screw which secures the front panel (see Fig. 6).
2. Remove the screws which secure the upper hinge (see Fig. 7).
3. Remove the upper hinge (hold the door in position to ensure that it does not
fall) (see Fig. 8)