User manual

48 ATAG
Electronic programmer
Setting the time
SELECT button
Minus button
Plus button
End time LED
Cooking time LED
Minute minder LED
Clock LED
Setting the time
After the electricity has been connected or after a
power failure, the Clock LED flashes.
Setting the time
1. Set the current time using the or button.
2. Wait for 5 seconds: the appliance is now
in normal mode (operating mode).
Changing or correcting the time
3. Press the SELECT button repeatedly until
the Clock LED flashes.
To correct the time proceed as in steps 1 and 2.
Note
The time can only be changed if no automatic
function (e.g. automatic turn on/off) has been
programmed.
The electronic programmer has the follow-
ing functions:
• Displaying the time
• Minute minder (alarm)
• Safety cut-out
• Automatic turn on/ off