User manual

52 ATAG
The Oven Electronic Control Display
The display has two sections.
The upper section has a black background and
green symbols and digits. It gives information about
the time (the current time of day, the programmed
cooking duration, the programmed end of cooking
time, etc.), and shows the name of the selected
cooking function or recipe.
The lower section has a black background and
green symbols and digits. It gives information about
the selected cooking function, the selected
temperature and the current temperature inside
the oven.
When the Oven is First Installed
When the oven is first connected to the electrical
supply, or when supply is restored after a long
power failure, the upper section of the display
shows this message:
"WELCOME TO * ATAG * BASIC -1 *"WELCOME TO * ATAG * BASIC -1 *
"WELCOME TO * ATAG * BASIC -1 *"WELCOME TO * ATAG * BASIC -1 *
"WELCOME TO * ATAG * BASIC -1 *
NEDERLANDS * ENGLISH * FRANCAIS *NEDERLANDS * ENGLISH * FRANCAIS *
NEDERLANDS * ENGLISH * FRANCAIS *NEDERLANDS * ENGLISH * FRANCAIS *
NEDERLANDS * ENGLISH * FRANCAIS *
DEUTSCH *DANSK * "DEUTSCH *DANSK * "
DEUTSCH *DANSK * "DEUTSCH *DANSK * "
DEUTSCH *DANSK * "
This message lists all the languages which can be
chosen to operate with the Oven Electronic Control
(Fig. 1).
Symbol flashing near the "Clock Symbol"
means that you need to set the current time of day
before using the oven.
To set the Correct Time of Day
1. While symbol flashes near the "Clock
Symbol" , set the current time of day turning
TEMPERATURE/TIME knob (Fig. 2). Once you
have set the time, the symbol keeps flashing for
5 seconds and then disappears. This means that
the setting has been stored in the Electronic
Control memory.
2. If symbol stops flashing before you have
had time to set the clock, press the "Time Function
)
Fig. 1
Fig. 2