User manual

54 ATAG
To switch the oven on and off
The oven must be switched on before setting any
cooking function or programme. When "ON/OFF"
button is pressed, the oven light will switch on.
The oven symbol and the message "LIGHT" appear
on the display (Fig. 5).
To switch off the oven, you can press "ON/OFF"
button at any time. Any cooking function or
programme will stop, the oven light will switch off
and the time display will show the time of day only.
Before first use, the oven should be heated
without food.
During this time, an unpleasant odour may
be emitted. This is absolutely
normalnormal
normalnormal
normal, and
is caused by residues of manufacturing.
Ensure the room is well ventilated.
1. Set the time of day with the electronic
programmer (see paragraph "To set the correct
time of day").
2. Press the "ON/OFF" button to switch on
the oven.
3. Turn the FUNCTIONS knob (Fig. 6) until the
"Top and Bottom Heat" function symbol .
4. Set the temperature to 250°C turning
clockwise TEMPERATURE/TIME knob (Fig. 7).
5. Allow the oven to run
emptyempty
emptyempty
empty for
approximately 45 minutes.
6. Open a window for ventilation.
This procedure should be repeated with the "Tur-
bo Fan Cooking" function and the "Max Grill"
Remove all packaging, both inside and
outside the oven, before using it.
The oven will work only if the time of day
has been set.
)
top and botto
Fig. 5
Fig. 6
top and botto
Fig. 7
Before Using the Oven for the First Time