User manual

ATAG 55
Once this operation is carried out, let the
oven cool down, then clean the oven cavity
with a soft cloth soaked in warm water to
which a little mild washing-up liquid has been
added.
Before cooking for the first time, carefully
wash the oven accessories.
To open the oven door, always hold the
handle in the centre.
To select a cooking function
1. Switch on the oven by pressing the "ON/
OFF" button.
2. Turn the FUNCTIONS knob to select the
required oven function. Each time the knob is turned,
a different cooking symbol appears in the lower
section of the display and the description of the
cooking function appears as a message in the
upper section. It’s also possible keeping turned
the knob to see the functions sequence.
The pre-set temperature for each function is shown
in the lower section, and symbol "}" flashes on
the right hand (Fig. 8).
3. Symbol "} " flashing means that it is
possible to adjust the pre-set temperature by
turning the TEMPERATURE/TIME knob (Fig. 9).
Temperature level is adjusted in 5 degree steps.
Please note that symbol "} " will flash for 5
seconds.
4. When 5 seconds elapse, symbol "}" will
disappear showing that the temperature level has
been stored in the Electronic Control memory. The
thermometer symbol rises slowly × , indicating
the degree to which the oven is currently heated.
5. When the required temperature is reached,
an acoustic alarm will sound for a short time and
the thermometer symbol will light permanently.
)
turbo fan coo
turbo fan coo
Fig. 8
Fig. 9
function for approximately 5-10 minutes.