User manual

60 ATAG
To programme the oven to switch
on and off
1. Carry out the "Cooking Duration" setting
as described at points 1 to 3 in the previous
chapter.
2. Press the "TIMER Button" twice until the
symbol flashes near the "End of Cooking Time"
symbol (Fig. 14).
3. Within 5 seconds, turn the TEMPERATU-
RE/TIME knob to select the required end of
cooking time, which is shown at the right hand of
the time display (Fig. 15).
4. After another 5 seconds after you have set
the time, the symbol stops flashing, the
thermometer symbol × comes off, the tempera-
ture display shows the temperature inside the oven
cavity and the oven switches off. This means that
the setting has been stored in the Electronic Control
memory and that the countdown started.
5. The oven will switch on and off
automatically according to your settings. When
cooking is completed, you hear an acoustic alarm
while both symbols and flash. The time
display shows "
0.000.00
0.000.00
0.00" at the left hand.
6. The alarm will switch off automatically after
two minutes. To switch off the acoustic alarm,
press "ON /OFF" button.
To cancel the programme, simply cancel the
Cooking Duration time as described at the end of
the previous chapter.
)
Fig. 14
Fig. 15