User manual

ATAG 49
Grill - Turnspit
To use the turnspit, proceed as follows:
1. Insert the spit frame on the second guide
from the bottom, as shown in the picture.
2. Insert the first fork in the spit, skewer the
food to be cooked and secure it by inserting the
second fork; fix the two forks by tightening the
special screws.
3. Insert the tip of the spit in the hole of the
turnspit motor, clearly visible in the middle of the
rear wall of the oven.
4. Place the front part of the spit on the spit
frame.
5. Unscrew the grip.
6. Turn the oven function control knob on
and the thermostat control knob to the desired
temperature.
The forks and the spit of the turnspit
are pointed and sharp. When using,
manipulate them with caution to avoid
any injury.
It is advisable to insert the dripping pan on
the first guide from the bottom, after pouring
about two cups of water in it.
How to use the fanned grill
Turn the oven function control knob on and
regulate the oven thermostat control knob on the
desired temperature.
This function offers an alternative method of cooking
food items, normally associated with conventional
grilling. The grill element and the oven fan operate
alternately, circulating hot air around the food.
When using this function, select a maximum
temperature of 200°C.