User manual

Programme
1)
Duration
(min)
Energy
(kWh)
Water
(l)
P4 70 - 80 0.7 - 0.9 11 - 12
P5 55 - 65 1.0 - 1.2 10 - 11
P6 30 0.9 9
P7 14 0.1 4
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of
dishes can change the values.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.
OPTIONS
Activate or deactivate the options be-
fore the start of a programme. You
cannot activate or deactivate the op-
tions while a programme operates.
If one or more options are set, make
sure that the related indicators are on
before the programme starts.
SAVE ENERGY
This option decreases the temperature in
the last rinse phase.
The use of this option decreases the energy
consumption (up to 25%) and the pro-
gramme duration.
The dishes can be wet at the end of the
programme.
How to activate the SAVE ENERGY
option
1.
Press
. The related indicator
comes on. In the display you can see
the update of the programme duration.
If the option is not applicable to the
programme, the related indicator
flashes quickly 3 times and then goes
off.
Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the use of rinse aid
and salt. The related indicators stay off.
The programme duration can increase.
How to activate the Multitab option
1.
Press
, the related indicator comes
on.
If you stop to use the combi detergent
tablets, before you start to use
separately detergent, rinse aid and
dishwasher salt, do these steps:
1. Set the water softener to the highest
level.
2. Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener to the water
hardness in your area.
5. Adjust the released quantity of rinse aid.
Acoustic signals
The acoustic signals operate when the ap-
pliance has a malfunction, when the adjust-
19