User manual

Operating Instructions
16
Activating/deactivating the acoustic signal
In addition to the optical display (e.g. indicating the end of the cycle,
errors) you can also choose to set an acoustic signal.
0 1. Open the door of the dishwasher.
2. Press the ON/OFF button.
The LED in the ON/OFF button will become illuminated.
3
If indicators for the programme buttons are lit, a wash programme has
been activated. The dishwashing cycle must be deselected:
Press function buttons 1 and 2 simultaneously for approx. 2 seconds.
All other indicators will go out.
3. Press the function buttons 1 and 2 simultaneously and keep them
pressed.
The LED indicators in function buttons 1 to 3 will flash.
4. Press function button 3.
The LED indicator for function button 3 will flash.
The
L display will indicate the current setting:
5. Pressing function button 3 will change the setting.
6. Once the
L display is indicating the required setting, press the ON/OFF
button.
The setting is now saved.
In Daily Use
• Is it necessary to refill with special salt or rinse aid?
• Load cutlery and dishes into the dishwasher
• Fill with dishwasher detergent
• Select a wash programme suitable for the cutlery and dishes
• Start the wash programme
The L display is flashing:
Acoustic signal activated (ex-factory setting)
The L display is not flashing:
Acoustic signal deactivated