User manual

Operating Instructions
11
Prior to using for the first time
Prior to using for the first time, remove all the clips with which the dish
racks are secured for transport. Then perform the following steps:
0 1. Adjust the water softener
2. Fill with Special Salt for the Water Softener
3. Fill with Rinse Aid
3
Special salt and rinse aid must not be added if you use 3-in-1 detergent
tablets.
Water softener
To avoid scale deposits on the dishes and in the dishwasher, the dishes
must be washed with soft water, i.e. water with a low lime content. The
dishwasher therefore has a built-in water softener, in which tap water
with a hardness of 4°d (German degree) and harder is softened with the
aid of special salt.
3
Your water supplier will be able to inform you about the hardness and
hardness range of the water in your area.
The water softener can be set manually using the water hardness
switch; it can also be set electronically using the buttons on the control
panel.
Water hardness
Adjusting the hardness
setting
Number of
flashes and
acoustic signals
1
In °d
2
In mmol/l
3
Range Manually Electronically
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
9,0 - 12,5
7,6 - 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
IV
1
10
4
9
8
7
6
10
9
8
7
6
0*
19 - 22
15 - 18
3,3 - 3,9
2,6 - 3,2
III
5
4*
5
4
11 - 14 1,9 - 2,5 II 3 3
4 - 10 0,7 - 1,8 I/II 2 2
under 4 under 0.7 I
1
no salt
necessary
1