User manual

Operating Instructions
33
5. Remove the flat filter (3) from the
base of the washing compartment
and clean both surfaces thoroughly.
6. Re-insert the flat filter.
7. Place the fine filter in the micro-fil-
ter and fit the two together.
8. Insert the filter system in place and
lock it by turning the handle clock-
wise as far as it will go. Ensure that
the flat filter does not protrude
above the base of the washing com-
partment.
1
Under no circumstances may the
dishwasher be used without its filters.
Cleaning the spray arm jets
Regularly check the jets in the
spray arms for blockages. When
cleaning is necessary, remove spray
arm from the fixture and clean jets
with a pointed object (wire or nee-
dle). Then rinse out the spray arm
using a strong jet of water.
3
Do not damage the jet opening.