Operation Manual

Adjusting the water softener
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Level
47 - 50 84 - 90 8.4. - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
< 4 < 7 < 0.7 < 5
1
2)
1) Factory position.
2) Do not use salt at this level.
How to adjust the level of the water
softener
1. Press the on/off button to activate the
appliance. Make sure that the appliance
is in setting mode, refer to “Setting and
starting a programme”.
2. Press and hold, at the same time, but-
ton
and button until the indica-
tors of buttons
, and
start to flash.
3.
Press button
.
•
The indicators of buttons
and
go off.
•
The indicator of button
contin-
ues to flash.
• The current setting of the water soft-
ener is indicated by intermittent
acoustic signals and the number of
flashes of the indicator
.
– E.g. 5 acoustic signals and 5 flash-
es + pause + 5 acoustic signals
and 5 flashes = level 5.
4.
Press button
again and again to
change the setting. Each time you press
the button you select the next level.
5. Deactivate the appliance to confirm the
setting.
20