Operation Manual

DescriptionSettingsOptionsButton press
Press Start/Stop to save the setting value and continue to the next setting.
For adjusting the contrast of the display on the panel.LCD contrast
(Low)
(High)
Press Start/Stop to save the setting value and continue to the next setting.
Rinse aid dosage setting.Rinse aid
(Off)
(Low dosage)
(High dosage)
Press Start/Stop to save the setting value and continue to the next setting.
You can activate this setting when using 3-in-1/ All-in-one
detergent. The dishwashing programmes automatically
adapt to provide the best possible dishwashing and drying
results every time. If you deactivate this option, the
dishwasher will return to ordinary function for all
programmes.
TAB
(3-in-1/all-in-one detergent)
(Off)
(On)
If this setting is activated there is no need to add rinse aid
since this option disables rinse aid dispensing. It also
reduces the amount of salt added to the water softener.
Note that salt must be put in the salt compartment.
NOTE!
In order to achieve good dishwashing results, it is
essential to check which type of detergent or all-in-one
product best suits your needs! Read the detergent
packaging carefully for information on proper use. Always
follow the directions for use or information on the
detergent packaging!
Press Start/Stop to save the setting value and continue to the next setting.
12