Owner's manual

ATAS INTERNATIONAL, INC.
SPECIFICATION DATA SHEET
1. PRODuCT NAmE
mETAFOR™
ARC-mETAFOR™
mFP120 – mFX120
2. mANuFACTuRER
ATAS INTERNATIONAL, INC.
Website: www.atas.com
Email: [e-mail]
Corporate Headquarters:
Allentown, PA 18106
Phone: [phone]
Fax: [phone]
Western Facility:
Mesa, AZ 85204
Phone: [phone]
Fax: [phone]
Southern Facility:
Maryville, TN 37801
Phone: [phone]
3. PRODuCT DESCRIPTION
Basic Uses:
Metafor and Arc-Metafor panels with the Wind-
Lok™ application have a ribbed appearance
with a concealed clipless fastening system.
Lightweight, but strong, installation does
not require additional structural changes.
The panels can be applied directly to wood
or metal framing. These panels are typically
used for siding, ceilings, fascias, mansards,
equipment screens, walkways, balconies,
entrances and vestibules. Arc-Metafor panels
are custom formed to either concave or
convex shapes and may be applied directly
to the framing without the need for sub-
sheathing.
Composition & Materials:
Metafor panels (MFP120) are roll-formed from
.032, .040 or .050 Aluminum. Arc-Metafor
panels (Convex-MFX120 and Concave-
MFV120) are available in .032 Aluminum only.
Sizes and Proles:
Panel widths are 12”; panel depth is a nominal
⁄”. Arc-Metafor panels have a minimum
convex radius of 5’-9” and a minimum concave
radius of 10’-0”. When calculating panel length
for ARC- Metafor, allow for an 9” deection
each end of the panel (18” total). Panel
lengths are custom specied from 1’-6” to
transportation limitations.
Colors & Finishes:
A choice of 30 colors is available in aKYNAR
500® PVDF or HYLAR 5000® PVDF nish.
(Request color chart or chips). An anodized
nish is available in clear or dark bronze.
Texture may be smooth or stucco embossed.
4. TECHNICAL DATA
KYNAR 500® PVDF or HYLAR 5000® PVDF based
nishes tested by paint supplier for:
Dry Film Thickness: ASTM D 1005, ASTM D
1400, ASTM D 4138 or ASTM D 5796
Specular Gloss: ASTM D 523
Pencil Hardness: ASTM D 3363
T-Bend Flexibility: ASTM D 4145
Mandrel Bend Flexibility: ASTM D 522
Impact Resistance: ASTM D 2794
Adhesion: ASTM D 3359
Water Immersion Resistance: ASTM D 870
Abrasion Resistance: ASTM D 968
Acid Resistance: ASTM D 1308
Acid Rain Resistance (Kesternich):
ASTM G 87 or DIN 50018
Salt Spray: ASTM B 117
Cyclic Salt Spray: ASTM D 5894 and
ASTM D 5487
Humidity Resistance: ASTM D 2247
Accelerated Weathering: ASTM D 822 and
ASTM G 155, ASTM G 151 or ASTM G 153
Color Retention, Florida Exposure:
ASTM D 2244
Chalking Resistance – ASTM D 4214
Cleveland Condensing Cabinet: ASTM D 4585
Cure Test, MEK Resistance: ASTM D 5402
Alkali Resistance, Sodium Hydroxide: ASTM D
1308, Procedure 7.2
Flame Spread Rating: ASTM E 84
Organic coatings meet requirements of AAMA
2605 when applied to aluminum.
Panel testing/ratings:
Aluminum: ASTM B 209
Coil Coating: ASTM A 755
Field Tested and Approved
Load Tables available upon request.
5. INSTALLATION
Installation is achieved by interlocking the
panel into the preceding panel and fastening
with mechanical fasteners. The fasteners are
concealed by the rib of the adjoining panel.
Installation manuals or hands-on training via
seminars are available through ATAS. Visit
www.atas.com for more information.
6. AVAILABILITY & COST
Availability:
Metafor and Arc-Metafor panels are available
through ATAS product distributors. A complete
line of related components and trim accessories
is available to complete the wall system. In
addition, a complete line of rainware and
perimeter roof edge trims can be supplied by
ATAS to complement the wall system. Flat sheet
and/or coil stock is available in matching color
for fabrication of related components by the
installing contractor.
Cost:
Contact ATAS product distributors for current
pricing.
7. WARRANTY
Products coated with a uoropolymer, KYNAR
500® PVDF or HYLAR 5000® PVDF nish carry
a thirty (30) year limited warranty against
cracking, peeling, chalking and fading.
8. mAINTENANCE
Metafor and Arc-Metafor panels are virtually
maintenance free. Surface residue may be easily
removed by conventional cleaning methods.
Minor scratches may be touched up with a
matching paint, available from the manufacturer.
9. TECHNICAL SERVICES
Complete technical information and literature
are available at www.atas.com. ATAS will assist
with design ideas and shop drawings.
10. FILING SYSTEm
• www.construction.com
• www.atas.com
• Additional product information is available from
the manufacturer upon request.
Metafor
TM
and Arc-Metafor
TM
are a trademarks of ATAS International, Inc.
KYNAR 500® is a registered trademark of Arkema.
HYLAR 5000® is a registered trademark of Solvay Solexis, Inc.
© 2009 ATAS International, Inc. LRD0909 LAT750



