Owner manual

ATAS INTERNATIONAL, INC.
SPECIFICATION DATA SHEET
1. PRODUCT NAME
LINEAR CEILING SYSTEMS
2. MANUFACTURER
ATAS INTERNATIONAL, INC.
website: www.atas.com
email: [e-mail]
Corporate Headquarters:
Allentown, PA 18106
Phone: [phone]
Fax: [phone]
Western Facility:
Mesa, AZ 85204
Phone: [phone]
Fax: [phone]
Southern Facility:
Maryville, TN 37801
Phone: [phone]
3. PRODUCT DESCRIPTION
Basic Uses:
Linear Ceiling Systems are available for interior
or exterior use.
Composition & Materials:
Standard Oerings: Panels are roll-formed
from .032 (PVDF nish), .024 or .019 (Polyester
Finish) Aluminum.
Sizes and Proles:
Panel widths may be 3 ⁄”, 7 ⁄” or
11 ⁄”. Panel lengths may be from 4’ to 45’.
Panels may have a rounded edge (LCR) or a
box edge (LCB). They may be installed with or
without a recessed ller strip or a ush ller
strip.
Colors & Finishes:
In the .032 aluminum, there is a choice of
30 colors in the KYNAR 500® PVDF or HYLAR
5000® PVDF nish. (Request color chart or
chips.) In the .019 aluminum, the polyester
nish is available in 6 standard colors. In the
.024 aluminum, the polyester nish is available
in white only. A mirror bright nish is available
in .024 aluminum with round edge only. The
.032 aluminum is also available in clear and
dark bronze anodized.
4. TECHNICAL DATA
KYNAR 500® PVDF or HYLAR 5000® PVDF
based nishes tested by paint supplier for:
Dry Film Thickness: ASTM D 1005, ASTM
D 1400, ASTM D 4138 or ASTM D 5796
Specular Gloss: ASTM D 523
Pencil Hardness: ASTM D 3363
T-Bend Flexibility: ASTM D 4145
Mandrel Bend Flexibility: ASTM D 522
Impact Resistance: ASTM D 2794
Adhesion: ASTM D 3359
Water Immersion Resistance: ASTM D 870
Abrasion Resistance: ASTM D 968
Acid Resistance: ASTM D 1308
Acid Rain Resistance (Kesternich):
ASTM G 87 or DIN 50018
Salt Spray: ASTM B 117
Cyclic Salt Spray: ASTM D 5894
and ASTM D 5487
Humidity Resistance: ASTM D 2247
Accelerated Weathering: ASTM D 822 and
ASTM G 155, ASTM G 151
or ASTM G 153
Color Retention, Florida Exposure:
ASTM D 2244
Chalking Resistance: ASTM D 4214
Cleveland Condensing Cabinet:
ASTM D 4585
Cure Test, MEK Resistance: ASTM D 5402
Alkali Resistance, Sodium Hydroxide:
ASTM D 1308, Procedure 7.2
Flame Spread Rating: ASTM E 84
Organic coatings meet requirements of AAMA
2605 when applied to aluminum.
Panel testing/ratings:
Aluminum: ASTM B 209
Coil Coating: ASTM A 755
Field Tested and Approved.
5. INSTALLATION
A suspended ceiling carrier is pre-punched
and rollformed from prepainted .040
aluminum. The standard length of the carrier
is 12’. The carrier is suspended by wire or
strips, or attached directly to the substructure,
and the panel is snapped on the carrier,
with or without ller strips. Because of the
4” increments on the carrier, the dierent
size panels are interchangeable. 1/8” space
should be allowed between panels for
thermal movement along the panel length.
For acoustical eciency, berglass insulation
may be placed across the top of the panels
between the carriers. Installation manuals
or hands-on training through seminars are
available through ATAS. Visit www.atas.com
for more information.
6. AVAILABILITY & COST
Availability:
Linear Ceiling Systems are readily available
through ATAS product distributors. Perimeter
trim, mouldings, etc. in matching or
coordinating colors are also available.
Cost:
Contact ATAS product distributors for current
pricing.
7. WARRANTY
Products coated with a uoropolymer, KYNAR
500® PVDF or HYLAR 5000® PVDF nish carry
a thirty (30) year limited warranty against
chalking and fading.
8. MAINTENANCE
Linear Ceiling Systems are virtually
maintenance free. Surface residue may be
easily removed by conventional cleaning
methods. Minor scratches may be touched
up with a matching paint, available from the
manufacturer.
9. TECHNICAL SERVICES
Complete technical information and literature
are available at www.atas.com. ATAS will assist
with design ideas and shop drawings.
10. FILING SYSTEM
• www.atas.com
• Additional product information is available
from the manufacturer upon request.
Linear Ceiling Sysems
TM
are trademarks of ATAS International, Inc.
KYNAR 500
®
is a registered trademark of Arkema.
HYLAR 5000
®
is a registered trademark of Solvay Solexis, Inc.
© 2011 ATAS International, Inc. LRD0611 LAT753




Linear Ceiling - LCB





Linear Ceiling - LCR




Linear Ceiling - LCB





Linear Ceiling - LCR