User's Manual

4. iTPMS APP Installation:

iTPMS App is for free. Through the iTPMS you can know

tire temperature and pressure, sensor battery voltage,

and each sensor’s ID.

4.1 Install APP (Take IOS as example)

4.1.1 Download the APP: iTPMS BLE from Apple Store or

Google Play.

4.1.2 Go to Setting => General => Bluetooth Page.

4.1.3 Turn on the Bluetooth

4.1.4: Turn on the Bluetooth, and it will scan the devices

automatically.

4.1.5 Install battery properly, and then enter to the sensor

ID s etting pages. After setting the ID properly, it will

read the tire data immediately.

4.2 App Operating

4.2.1 Click below ID, and enter the ID learning page, start

to learn the sensor ID.

Note: When the above BLE words light up, then it

represents it detects AT63’s signal already.

4.2.2 Place batteries into the sensor properly. When

sensor detects pressure, ID will turn to red to alert the

user.

4.2.3 Enter Setup page, users can set up the unit and limit

of tire pressure and temperature.