User manual

Rainbow2 IP Phone User Manual

ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn

1. Interdigit Long Timer: If the numbers or characters input are not finished and they have not

matched the full dial plan, the phone will wait for the long time that has been set and then dial

them out automatically. Range: 1 – 64 sec

2. Interdigit Short Timer: If the numbers or characters input are matched the full dial plan, the

phone will wait for the short time that has been set and then dial them out automatically.

Range: 1 – 64 sec

3. Reorder Delay: Delay after far end hangs up before reorder tone is played. 0 means play

reorder tone immediately. Range: 0 – 60 sec

4. Reorder Time: Set the duration of showing Call ended

 Date And Time

NTP: Network time protocol

1. NTP Server: Set NTP server address, which can be IP address or domain name.

2. Time Zone: Choose your own time zone.

3. Daylight Saving Time: whether to enable Daylight saving time.

4. Daylight Saving Time Rule: This parameter is a rule with three fields, each field is separated by

semicolon; as show below:

Start=<start-time>; end=<end-time>; save=<save-time>

<start-time> and <end-time> specify the start and end date of daylight saving time,

month/date/week and <save-time> is the amount of hour/min/sec to add to the current time during

daylight saving period. The <save-time> value can be preceded by a negative (-) sign if subtraction

is desired instead of addition.

If <weekday > is 0, it means the date to start or end daylight saving is at exactly the given date. In

that case, the <day> value must not be negative. If<weekday >is not zero, then the daylight saving

starts or ends on the <weekday >on or after the given date if <day> is positive, or on or before the

given date if <day> is negative. If <day> is -1, it means the <weekday> on or before the end-of-the