User manual

www.atcom.cn
20/40
Make an incoming pstn call to port 1 and you can see 6000 extension will ring. Use the eyebeam
to answer the call.
Make another incoming call to port 2 and you can see the line2 of 6000 is ringing. You can press
LINE2 to answer the second call; Line1 will be hold and hear the music. To transfer this call to
extension 6001, press XFER in the eyebeam and then press 6001 and then XFER again to transfer
the call, after transfer the call, press hang up to return to line1.
4.2 Ring another extension if operator doesn’t answer
Purpose: If secretary does not answer FXO CALL pass call to next extensions, If no call answer
send call to voicemail. 6000 ext voicemail
Setting a Ring Group as show below:
Put 6000 and 6001 to the ring group. Set the strategy to Ring In Order. And set the timeout to 15
seconds. If not answer, the call will go to the 6000 voicemail box
Set the incoming route to the new one “incoming_group”