User manual

www.atcom.cn
9/40
2.2 Ways to Access IP04
There are three ways to access the IP04 : Web, SSH or Console port.
Web:
The fastest way and easiest way to configure IP04, you can do most configure via web
interface
 Use Web browser to open the GUI of IP04.
Default IP address: 192.168.1.100
Default username/password: admin/mysecret
IP04 doesn’t support IE well. You need to use Firefox to configure it.
SSH:
Advance way to configure and debug IP04. Via ssh to access the IP04 directly, you can do
many advance configure in Linux kernel and Asterisk in this mode.
 Use the SSH tool ( putty ) to access the IP04.
Default IP address: 192.168.1.100
Default username/password: root/uClinux or root/12xerXes06
Console Port:
In the console access, you can upgrade the full kernel and access the Linux part, access via
console port is very useful in recovering the system.
 Please refer HOWTO – Use RS232 port to connect IP-XX?
Most of our configure job will be done in the web interface. And we will do some advance
configure via SSH tool.
Default http access port of IP04 is IP08, you can change this port in the file
/etc/asterisk/http.conf.