User manual

AT-323 IAX2 Phone User Manual (V1.43)
31
Relevant usage: None
¾ Command write
Syntax descrIPtion: No keyword and parameter
Usage: Save the configuration and restart the AT-320 IP phone.
¾ Command ping
Syntax descrIPtion: ping IP address
Usage: ping IP address of other NAT device
Relevant usage: In telnet window, input ping xx.xxx.xx.xxan IP
address and return, then the result will be displayed. If the address is
effective, “ping OK” will be seen; if the address is ineffective, nothing
will be seen. Fox example:
P:\>ping 203.93.9.57
P:\>
ping OK
P:\>ping 27.56.120.56
P:\>
Note Usually, the echo time of ping command is no more than 1 second. So if the
result is not displayed in 5 seconds, ping command is fail.
¾ Command ftp
Syntax descrIPtion: ftp value
Usage: the system connects to the FTP server auto to get the
corresponding file and deal with it.
Relevant usage: ftp X
X ranged from 0 through 2:
X-0: Connect to FTP Server to get the file of updating program and save
it to the SDRAM of the phone. Then the file can be read by PalmTool.
This operation aims at testing.
X-1: Connect to FTP Server to get the file of updating program and
update program Flash. This operation aims at updating program.
X-2: Connect to FTP Server to get the file of updating dial rules and
update program Flash. This operation aims at updating dial rule.
Note When you use ftp 0 and ftp 1 commands, if the file get from FTP server is too large
or the net speed is too slow, then the process will not be seen in telnet window.
Keison Products www.keison.co.uk [e-mail] Tel: [phone]